|
This gate can be installed inside the
casing of the door or outside the door, see above. It will pivot out of
the way when not in use. The gate can be mounted on the left or right.
Simply turn the gate upside down to mount on the opposite
side.
-
Stand folded gate against the doorframe where you
intend to mount it.
-
Mark the mounting surface through the holes in the
hinge bar with a pen or pencil
For mounting into:
|
|
 |
Wood: use 5/16 x 2" Lag
Bolts |
|
|
|
Steel: drill and tap for 5/16 x 1"
Bolts. |
|
|
|
Brick or Concrete:5/16 x 2" Lag Bolts in
3/8" holes |
-
Drill appropriate size holes in the mounting
surface.
-
Mount the gate by inserting the screws through the
hinge bar.
-
Stretch the gate across the opening. Line up the
locking bar on the opposite side so that the padlock hole in the gate
and the padlock hole in the locking bar match.
-
Mark through the mounting holes of the locking bar
with a pen or pencil.
-
Drill holes and insert the screws to mount the locking
bar.
-
Pull the door into the locking bar, and insert a
padlock. |
